ConnectorZ 20 Pin ATX + 4 Pin P4 Connector Removal Tool Version 3

Version 3 of our affordable ConnectorZ ATX (square molex pin) extractor is finally here!

This tool is specially designed for removal of the 20 Pin ATX Connector, 4 Pin P4 Connectors, 6 Pin PCI-E and 8 Pin Opteron connectors found on modern ATX PSUs.

Very handy for Sleeving Mods or swapping over to ConnectorZ colored or UV Reactive replacement connectors. Use the right tool for the job and save yourself the headaches of damaged pins.

Using the tool couldn't be any easier.

Simply insert the removal tool into the connector with the two outside legs of the tool covering the two tabs on the outside of each pin. The center post will guide and align with the middle of the pin.

Once the tool has reached the bottom of the housing, gently ease the wire from the back of the ATX connector.

Please be careful when using these tools. Too much pressure or forcing the pin out may require recrimping the line. Remember, patience is a modder's best skill.

All ConnectorZ removal tools are precision instruments and should be handled delicately and with care. All tools are inspected prior to shipment. ConnectorZ will not warranty breakages of this tool as it will only break if used improperly.

ConnectorZ 20 Pin ATX + 4 Pin P4 Connector Removal Tool Version 3