ConnectorZ 20 Pin ATX + 4 Pin P4 Connector Removal Tool Version 2

Version 2 of our affordable ConnectorZ ATX (square molex pin) extractor is finally here!

This tool is specially designed for removal of the 20 Pin ATX Connector and the 4 Pin P4 Connectors found on all ATX PSUs. Very handy for Sleeving Mods or swapping over to ConnectorZ colored or UV Reactive replacement connectors. Use the right tool for the job and save yourself the headaches of damaged pins.

It couldn't be any easier. Simply insert the tool into the connector with the two legs of the tool covering the two tabs on the outside of each pin. Push firmly until the legs of the tool cover the tabs on the pin. Use the plunger to push the pin gently out the back of the housing.

Please be careful when using the tool not to apply too much pressure or force the pin out as this can cause the tool to break due to the extremely thin metal it is constructed of.

All ConnectorZ removal tools are precision instruments and should be handled delicately and with care. All tools are inspected prior to shipment. ConnectorZ will not warranty breakages of this tool as it will only break if used improperly.

ConnectorZ 20 Pin ATX + 4 Pin P4 Connector Removal Tool Version 2