Panaflo 80mm M1B
- FBA08A12M1BX
The Panaflo series of case fans are highly rated for their high air flow, while using less power and less noise than the competition. Long recognized by enthusiasts for their superior noise/performance ratio, Panaflo fans offer a legendary noise per unit airflow specification.
Panasonic's Panaflo series of fans feature Hydro Wave bearings for low noise levels and reliability. The Panaflo series are simply the best computer case fans you can buy and our number one selling brand.
These are the 80mm fans that ADPmods recommends for Thermalright Heatsinks. This M1B model supports RPM monitoring (aka tach sensing) when used with a 3 Pin Panaflo Tail. Please select the appropriate connector before adding this fan to your cart.
Important note: All of our Panaflos ship with 2 bare wires and no Molex connector by default. If you do need a tail with a Molex connector please choose one from our options menu. M1A series (the most common) Panaflos do not support RPM monitoring via a 3rd wire. If you require RPM monitoring or sensing, please purchase a M1B or BX model if available. Please note, the M1B and BX models are rare.
| Panasonic Part # |
FBA08A12M1BX |
| Dimensions |
80mm x 80mm x 25mm |
| Speed |
2450 RPM |
| Air Flow |
32.1 CFM |
| Noise Level |
28.0 dBA |
| Rated Voltage |
12v DC |
| Input Power |
1.49 Watt |
| Rated Current |
124ma |
| Bearing Type |
Panaflo Hydro Wave |
Panaflo 80mm M1B
- FBA08A12M1BX |
