MORE IMAGES AVAILABLE
| Compatible CPUs and
Motherboards |
|
| |
Socket |
CPU |
Silent Mode
(1,000~1,400rpm) |
Low-noise Mode
(1,400~2,000rpm) |
Compatible
Motherboard |
| INTEL |
775 |
Pentium 4 |
Prescott |
All Speeds |
All Speeds |
 |
| 478 |
Celeron |
All Speeds |
All Speeds |
|
| Pentium 4 |
Willamette |
| Northwood |
| Prescott |
| AMD |
754 |
Sempron |
All Speeds |
All Speeds |
|
| Athlon 64 |
| 939 |
Athlon 64 |
| Athlon 64 FX |
| 940 |
Athlon 64 FX |
| Opteron | |
|
| |
1) Intel
Pentium4 Socket 775/478
2) AMD Sempron/AMD64 Socket
754/939/940
* Note : No
motherboard components with a height greater than 39mm
(1.53inch), as well as the
PSU,
disk drives, VGA card, and RAM should be present within a 68mm
(2.68 inch) radius from the center of the
CPU. |
|
| |
| Specifications |
|
 CNPS7700-Cu
|
| |
- Dimensions |
: 136(L) x 136(W) x 67(H)mm |
| |
- Weight |
: 918g |
| |
- Base Material |
: Pure Copper |
| |
- Dissipation Area |
: 3,268 cm2 |
| |
- Bearing Type |
: 2-Ball |
| |
- Speed |
: 1,000 ~ 2,000rpm ¡¾ 10% |
| |
- Thermal
Resistance |
: 0.19 ~ 0.24¡ÆC/W |
| |
- Noise Level |
: 20 ~ 32dB ¡¾ 10% | |
FAN
Speed Controller (FAN MATE 2)
|
| |
- Dimensions |
: 70(L) x 26(W) x 26(H)mm |
| |
- Weight |
: 20g |
| |
- Output Voltage |
: 5V ~ 11V ¡¾ 2% |
| |
- Allowable Power |
: 6W or lower |
| |
- Connector |
: 3-Pin |
| |
| | | |
| |
 |
|
1.
Does not generate noise or vibration in Silent
Mode.
2. Pure Copper base material ensures excellent
heat dissipation.
3. Intel Pentium 4 (Socket 775),
Intel Pentium 4 (Socket 478), and AMD64 (Socket
754/939/940)
compatible
design for broad compatibility.
4. The large 120mm
fan inside the FHS maximizes cooling performance by
providing sufficient
airflow
even at slow rotation speeds.
5. The large 120mm fan
provides air flow over a large area, cooling not only
the CPU, but the
VGA card,
Northbridge, FET, and RAM.
6. The adjustable fan
speed controller (FAN MATE 2) enables control of noise
and fan performance. |
| |
 |
| |
 |
|
 |
Common Components
1) Heatsink
Assembly (CNPS7700-Cu)
2) Four Grips (2 each
for S-Type and L-Type)
3) Four Bolts
4)
Thermal Grease
5) Fan Speed Controller (FAN
MATE 2)
6) Double-sided Tape (for installing
FAN MATE 2)
7) Cable for FAN MATE 2
8)
User's Manual - in English and Korean |
Components for Intel Pentium 4 (Socket
775)
9) One Clip
Support for Socket 775
10) One Backplate for
Socket 775
11) Four Clip Support Fixing
Bolts | |
| |
 |
Components for Intel Pentium 4
(Socket 478)
12) Two
Clip Supports for Socket 478 |
Components for AMD Sempron/AMD64
(Socket 754/939/940)
13) Two
Nipples
14) One Backplate for AMD64
15) One
set of Washers
| | | |
| |
 |
|
Zalman
affixes a Computer Noise Prevention System (CNPS) mark to all
components used for
noiseless computers. |
| |
 |
|
1.
Korean Patent Application No. 00-54635
2. Korean Design
Application Nos. 04-16030, etc.
3. Patents pending in over 20
nations around the world, including the USA, EU, and Japan. |
| |
 |
|
1.
Fan should be set to Normal Mode if OVERCLOCKING.
2. Zalman
Tech Co., Ltd. is not responsible for any damage resulting from CPU
OVERCLOCKING.
3. The maximum weight for a cooler is
specified as 450g for Intel Socket 775/478 and AMD
Socket
754/939/940. Special care should be
taken when moving a computer equipped with a cooler
which
exceeds the relevant weight limit. Zalman
Tech is not responsible for any damage that
occurs
when moving a computer. |
|
